The short answer
Choose using sustained stream stability, not internet speed alone. A wired comparison with identical encoding helps reveal wireless contention and signal problems.
Work through the checks
Check which Ethernet, Wi-Fi or VPN adapter owns the route to the camera. Test a single known route before changing adapter priority or network policy.
Test one camera and one stream before opening a larger camera wall. Keep the camera settings unchanged while you establish whether the first live image is stable.
Compare with a wired connection where practical, keeping the stream profile unchanged. This separates Wi-Fi signal or contention problems from camera encoding and viewer behavior.
Lower one camera parameter at a time: frame rate, resolution or bitrate. Re-test motion and readable detail; a lower idle bitrate alone does not prove a usable moving image.
What to verify
Show a visible changing clock or a supervised movement in the camera scene, then compare it with the live image. Use the same source and layout for each latency comparison.
Sources and scope
AeoCam is available for Windows. Camera settings below describe protocol preparation, not a certification of a particular camera or a promise of every feature in every app version. Check the installed build and the Microsoft Store listing for current availability.
Vendor documents describe the camera or protocol. No physical-camera compatibility test is claimed here. Menus and capabilities can change with model and firmware.