The short answer
Hanwha stream paths depend on camera profiles and device family. Multisensor and recorder numbering can start at zero, so match the actual scene before declaring success.
Work through the checks
Identify the camera by model, hardware revision, firmware and MAC address. Keep this inventory separate from passwords; two devices with similar names may expose different protocols.
Match the configured Hanwha profile number. The documented multisensor and recorder examples use zero-based sensor/channel numbering, unlike many one-based camera examples.
Match the requested channel or lens to the manufacturer’s numbering. A valid stream from the wrong channel can look like success while showing another camera.
Decide whether the source is the camera itself or an NVR channel. Use the recorder address and recorder account for a recorder-provided stream, and check its channel numbering separately.
rtsp://192.0.2.10:554/profile1/media.smpWhat to verify
Test one camera and one stream before opening a larger camera wall. Keep the camera settings unchanged while you establish whether the first live image is stable.
Sources and scope
AeoCam is available for Windows. Camera settings below describe protocol preparation, not a certification of a particular camera or a promise of every feature in every app version. Check the installed build and the Microsoft Store listing for current availability.
Vendor documents describe the camera or protocol. No physical-camera compatibility test is claimed here. Menus and capabilities can change with model and firmware.