The short answer
Frame rate is a trade-off between motion detail and processing cost. Test the fastest relevant movement instead of choosing from a static preview.
Work through the checks
Test one camera and one stream before opening a larger camera wall. Keep the camera settings unchanged while you establish whether the first live image is stable.
Lower one camera parameter at a time: frame rate, resolution or bitrate. Re-test motion and readable detail; a lower idle bitrate alone does not prove a usable moving image.
Use representative day and night scenes, including empty scenes. Compare missed events and unwanted triggers before changing sensitivity; one successful alert is not a reliability measurement.
Observe CPU, GPU, memory and network use in Windows Task Manager with one view, then add views gradually. Record the point where playback begins to lag.
What to verify
Show a visible changing clock or a supervised movement in the camera scene, then compare it with the live image. Use the same source and layout for each latency comparison.
Sources and scope
AeoCam is available for Windows. Camera settings below describe protocol preparation, not a certification of a particular camera or a promise of every feature in every app version. Check the installed build and the Microsoft Store listing for current availability.
Vendor documents describe the camera or protocol. No physical-camera compatibility test is claimed here. Menus and capabilities can change with model and firmware.